1. CHECK VERSI FIRMWARE
VERSION#
[VERSION]:GT350_10_61A_LG10_WM
[BRANCH]:11CW1352MP GXQ61D_GPS_11C
[BUILD]:2015/12/03 16:35
2. CHECK PARAMETERS
3. CHECK SETTING INTERNET DAN ARAH SERVER
PARAM#
IMEI:864799998888777;TIMER:10,10;SENDS:3;SOS:,,;CENTER:;Sensorset:10,3,5,1;TimeZone:E,8,0;
GPRSSET#
GPRS:ON; Currently use APN:internet,wap,wap123; Server:1,track.intai.id,6023,0; URL:http://maps.google.com/maps?q=;
4. CHECK STATUS
5. CHECK POSISI GPS SAAT INI
WHERE#
Current position! Lat:N22.57776,Lon:E113.91667,Course:334,Speed:0Km/h,DateTime:2015-12-28 09:15:12
STATUS#
Charging.Battery:4.17v.GPRS:Link Up;GSM Signal Level:strong;GPS:Successful Positioning,SVS used in fix:6.GPS Signal level:41,39,37,21,23,28.GPS_Mode:GPS_SAVE_MOD2;Defense:OFF;
6. CHECK POSISI SAAT INI DENGAN ALAMAT URL GOOGLE MAPS
7. CHECK POSISI
POSITION
e.g.
GPS located: <01-08
17:36>
URL#
e.g.<01-08
17:36>
8. CHECK GEOFENCE STATUS
GFENCE#
{1:OFF;} {2:OFF;} {3:OFF;} {4:OFF;} {5:OFF;}
TECHNICAL SETTING
(KHUSUS TEKNISI)
1. Set APN
APN, apnname#
OR
APN, apnname,user,pwd#
Close automatic APN and set by yourself.
APN#
Check the current APN parameters.
2. Set Automatic APN
ASETAPN, X#
X=ON/OFF;
ON: open automatic APN;
OFF: close automatic APN.
ASETAPN#
Check automatic APN status
3. Set Automatic GMT
ASETGMT,X#
X=ON/OFF;
ON: open automatic GMT;
OFF: close automatic GMT.
ASETGMT#
Check automatic GMT status
4. Set Server Parameters
SERVER,mode,domainName/IP,port,protocol#
eg: SERVER,1,www.ydpat.com,8011,0#
SERVER,0,211.154.135.113,8011,0#
mode = 1 means set with domain name
mode = 0 means set with ip address
protocol = 0 means connect server with TCP protocol
protocol = 1 means connect server with UDP protocol
SERVER#
Check the current sever parameters
5. Set GMT Parameters
GMT,A,B,C#
A:E or W;
"E" means Eastern time-zone,
"W" means Western time -zone;
default:E
B:0~12;
time zone default:8
C:0/15/30/45;
half time zone;
default:0
GMT#
Check the current time zone parameters
6. Restore to Factory
FACTORY#
Restore to factory setting
7. Edit URL
EURL,networklinks#
Set the network links for latitude and longitude,
default: http://maps.google.com/maps?q=
EURL#
Check the current URL
8. Set Language
LANG,A#
A=0/1 ;
0 means English;
1 means Chinese
LANG#
Check the language
9. GPRS Switch
GPRSON,X#
X=0 or 1;
"1" means GPRS ON,
"0" means GPRS OFF,
default: 1
GPRSON#
Check the current GPRS status
10. Reboot
RESET#
The device would reboot in 20S after receiving the command.
11. SOS
settingSOS,A,phone number 1,phone number 2,phone number 3#
Add SOS phone number.
SOS,D,sequence number 1, sequence number 2,sequence number 3#
Delete the phone number according to the sequence number.
SOS,D,phone number#
Delete the matching SOS phone number.
SOS#
Check the SOS phone number.
12. Heartbeat Interval
settingHBT,T2#
T2 ranges 1~300 (minutes),heartbeat package upload interval;
default is 3;
HBT#
Check the current parameters of T2.
13. Clear The Backup
dataCLEAR#
14. Set The Low Battery Alarm
BATALM, A, M#
A=ON/OFF,
default: ON;
15. Boot Remind
BOOTALM, A, M#
A=ON/OFF,
default: OFF
16. Set The GPS Data Sending Batch
BATCH,A,N#
A=ON/OFF,
data sending batch function on or off,
default:OFF
17. Set The GPS Controlled Time by Sensor
SENDS,A#
A=0-300(minute),
time duration for GPS to work once vibration detected,
0 means GPS always on work,
default: 3(minute)
SENDS#
Check the parameters of the time.
18. Clear The Backup
dataCLEAR#
19. Set The Static Data Filtering
SF,A,B#
A=ON/OFF;
static drift filtering switch;
default: ON
B=10-1000(m);
maximal filtering distance;
default: 100(m);
SF#
Check the parameters.
20. Set Delay Time of Voice Monitor
DELAY,A#
A=5-18 seconds;
Default: 10 seconds (Enter Listen-In after 5 senconds calling)
21. Monitoring Setting
MONITOR#
22. Set Geofence Alarm
GFENCE,N,B,0,D,E,F,X,M#
circle area;
N=1-5;
Fence sequnce number
B=ON/OFF,
open or close fence alarm,
default:close;
D=the latitude of the circle center;
E=the longitude of the circle center;
F=1~9999,
the fence radius,
unit:100 meters;
X=IN/OUT;
IN: alarming when get in the fence,
OUT: alarming when get out the fence,
blank means both alarming when get in or get out the fence,
default: blank.
M=0/1;
way of alarming,
0:GPRS only,
1:SMS+GPRS,
default:1
GFENCE,N,B,1,D,E,F,G,X,M#
rectangle area
N=1-5;
Fence sequnce number
B=ON/OFF,
open or close fence alarm,
default:close;
D=the latitude of the position 1;
range:-90 ~90(degree);
E=the longitude of the position 1;
range:-180 ~180(degree);
F=the latitude of the position 2;
range:-90 ~90(degree);
G=the longitude of the position 2;
range:-180 ~180(degree);
the latitude supports "N/S" or "+/- " coming before it's value;
the longitude supports "E/W" or "+/- " coming before it's value;
GFENCE#
Check the parameters of the fence.
23. Set The Low Battery Alarm
BATALM, A, M#
A=ON/OFF,
default:ON;
M=0/1,
way of alarming,
0: GPRS only,
1: SMS+GPRS,
default:1;
BATALM,OFF#
Close the low battery alarm.
BATALM#
Check the parameters of the alarm.
24. Set The SOS Alarm
SOSALM,A,M#
A=ON/OFF,
default:ON;
M=0/1/2/3,
way of alarming,
0 :GPRS only,
1: SMS+GPRS,
2 : GPRS+SMS+phone call,
3: GPRS+phone call;
default:3;
SOSALM,OFF#
Close the SOS alarm.
SOSALM#Check the parameters of the alarm.
25. Call Settings
JC,A#
A=0-1,
0: two-way communication;
1:monitor;
default: 0
26. Set The Dialing Times
CALL,N#
N=1~3,
default:1,
times to dial all numbers;
27. Set Ring Mode
LS,A#
A=0-2,
0: Flash + Sound;
1: Flash;
2: No flash and sound;
default: 0
LS#
Check current statue.
28. Set Sensitivity of
SENSORLEVEL,A#
A=1-5: sensiticity range;
default: 2
LEVEL#
Check the current sensitivity of sensor.
29. Set The Instruction Password
PWDSW,A#
A= ON,
enable the instruction password.
PWDSW,password,B#
Numbers and letters mix inputs supported for instruction password, at least 1 character, no more than 19 characters,
default:666666;
B=OFF,
Disable the instruction password.
30. Revise The Instruction Password
PASSWORD,A,B#
A=old password,
numbers and letters mix inputs supported, at least 1 character, no more than 19 characters,
default:666666;
B=new password,
numbers and letters mix inputs supported, at least 1 character, no more than 19 characters.
31. Set The SMS Forwarding
FW,A,B#
A=phone number,
phone number to send;
B=SMS content,
content to forward.
* Only SOS can use this command.
32. Set Boot Alarm
BOOTALM,A,M#
A=ON/OFF,
default: OFF
M=0/1;
way of alarm;
0: GPRS;
1: GPRS+SMS,
default: 1
BOOTALM,OFF#
Turn off boot alarm
BOOTALM#
Check current statue.
33. Set Work Mode
MODE,N,T#
N=1/2,
1: WIFI timing and positioning mode
2: GPS timing and positioning mode,
default: 1
N=1,
T means wifi upload interval in fixed time (10-86400 seconds)
N=2,
T means if vibration detected and the device is motional,
the GPS data will be uploaded in T;
If device is motionless, the GPS will sleep.
(10-86400 seconds)
default: 180
MODE#
Query current work mode
34. Activite GPS Command (* only for tracking mode)
GPSON,T#
T=5~300(minutes)
GPSON#
GPS works for 5 minutes.
35. Remote Shutdown
SHUTDOWN#
36. Set WIFI
WF,A,T1,T2#
A=ON/OFF,
default: ON
T1=1~60(second);
means scanning hot time after open wifi;
default: 10
T2=10~65535(second);
means Device automatically turns on WIFI search every T seconds and uploads hotspot to platform,
default: 180
WF#
Check current statue.
37. Turn On Vibration Upload Command
ST,M,A,B#
M=ON/OFF
means to turn the vibration upload switch on or off.
The default is ON.
A=10-300 seconds;
SENSOR detection time range;
default: 10 seconds
B=1-20 times;
valid vibration threshold;
default: 1
38. Query Current Parameter
ST#