1. Check Versi firmware

VERSION#

[VERSION]:GT350_10_61A_LG10_WM
[BRANCH]:11CW1352MP GXQ61D_GPS_11C
[BUILD]:2015/12/03 16:35 

2.Check parameters

PARAM#

IMEI:864799998888777;TIMER:10,10;SENDS:3;SOS:,,;CENTER:;Sensorset:10,3,5,1;TimeZone:E,8,0; 

 

3. Check setting internet dan arah server

GPRSSET#

GPRS:ON; Currently use APN:internet,wap,wap123; Server:1,track.intai.id,6023,0; URL:http://maps.google.com/maps?q=;

 

4. Check status

STATUS# 

Charging.Battery:4.17v.GPRS:Link Up;GSM Signal Level:strong;GPS:Successful Positioning,SVS used in fix:6.GPS Signal level:41,39,37,21,23,28.GPS_Mode:GPS_SAVE_MOD2;Defense:OFF; 

 

5. Check posisi GPS saat ini

WHERE#

Current position! Lat:N22.57776,Lon:E113.91667,Course:334,Speed:0Km/h,DateTime:2015-12-28 09:15:12 

 

6. Check posisi saat ini dengan alamat URL Google map

URL#

e.g.<01-08
17:36>http://maps.google.com/maps?q=N22.577156,E113.916748 

 

7. Check posisi

POSITION
e.g.
GPS located: <01-08
17:36>http://maps.google.com/maps?q=N22.577156,E113.916748
 

8. Check geo fence status

GFENCE#

{1:OFF;} {2:OFF;} {3:OFF;} {4:OFF;} {5:OFF;} 

Teknikal Setting (untuk Teknisi)

 

1. Set APN 
APN, apnname#
OR
APN, apnname,user,pwd#
Close automatic APN and set by yourself.

APN#

Check the current APN parameters.

2. Set automatic APN

ASETAPN, X#

X=ON/OFF;
ON: open automatic APN;
OFF: close automatic APN.

ASETAPN#

Check automatic APN status

3. Set automatic GMT

ASETGMT,X#

 X=ON/OFF;
ON: open automatic GMT;
OFF: close automatic GMT.

ASETGMT#

Check automatic GMT status

 

4.Set server parameters

SERVER,mode,domainName/IP,port,protocol#

eg: SERVER,1,www.ydpat.com,8011,0#
        SERVER,0,211.154.135.113,8011,0#
mode = 1 means set with domain name
mode = 0 means set with ip address
protocol = 0 means connect server with TCP protocol
protocol = 1 means connect server with UDP protocol

SERVER# Check the current sever parameters

 

5. Set GMT parameter

GMT,A,B,C#

 A:E or W;"E" means eastern time zone, "W" means western time  zone;default:E
B:0~12;time zone default:8
C:0/15/30/45;half time zone;default:0

GMT#

Check the current time zone parameters

 

6. Restore to factory 

FACTORY#

Restore to factory setting

7. Edit URL

EURL,networklinks# 

set the network links for latitude and longitude,  default: http://maps.google.com/maps?q=

EURL# Check the current URL

8. set language

LANG,A# A=0/1 ;  0 means english;    1 means chinese

 LANG# check the language

 

9.GPRS switch

GPRSON,X# X=0 or 1;"1" means GPRS ON,  "0" means GPRS OFF,  default:1

GPRSON# Check the current GPRS status

 

10. Reboot 

RESET# The device would reboot in 20S after receiving the command.

 

11. SOS

settingSOS,A,phone number 1,phone number 2,phone number 3# Add SOS phone number.

SOS,D,sequence number 1, sequence number 2,sequence number 3# Delete the phone number according to the sequence number.

SOS,D,phone number# Delete the matching SOS phone number.

SOS# Check the SOS phone number.

 

12. Heartbeat interval

settingHBT,T2# 
T2 ranges 1~300 (minutes),  heartbeat package upload  interval ; default is 3;

HBT# Check the current parameters of T2.

13. Clear the backup

dataCLEAR# 

14. Set the low battery alarm

BATALM, A, M# A=ON/OFF,  default:ON;
M=0/1,  way of alarming, 0: GPRS only, 1: SMS+GPRS,  default:0;

BATALM,OFF# Close the low battery alarm.

BATALM# Check the parameters of the alarm.

 

15. Boot remind

BOOTALM, A, M# A=ON/OFF,default: OFF
M=0~1, way of alarming, 0: GPRS only,1: SMS+GPRS, default:0

  BOOTALM,OFF# Close the boot remind

 

16. Set the GPS data sending batch

BATCH,A,N# A= A=ON/OFF, data sending batch function on or off, default:OFF
N=1~50, N means the number of messages in the batch, default:30;

BATCH# Check the number of messages in a batch.

 

17. Set the GPS controlled time by sensor

SENDS,A# A=0-300(minute),  time duration for GPS to work once vibration detected, 0 means GPS always on work, default: 3(minute)

SENDS# Check the parameters of the time.

 

18. Clear the backup

dataCLEAR#  

]

19. Set the static data filtering

SF,A,B# A=ON/OFF;static drift filtering switch;default: ON
B=10-1000(m);maximal filtering distance;default: 100(m);

SF# Check the parameters.

 

20. Set delay time of voice monitor

DELAY,A# A=5-18 seconds; Default: 10 seconds (Enter Listen-In after 5 senconds calling)

 

21. Monitoring setting

MONITOR# 

22. Set geo-fence alarm

GFENCE,N,B,0,D,E,F,X,M# circle area;
N=1-5;Fence sequnce number
B=ON/OFF,  open or close fence alarm,  default:close;
D=the latitude of the circle center;
E=the longitude of the circle center;
F=1~9999,  the fence radius, unit:100 meters;
X=IN/OUT;IN: alarming when get in the fence, OUT: alarming when get out the fence, blank means both alarming when get in or get out the fence,  default: blank.
M=0/1;way of alarming, 0:GPRS only, 1:SMS+GPRS, default:1

GFENCE,N,B,1,D,E,F,G,X,M# rectangle area
N=1-5;Fence sequnce number
B=ON/OFF,  open or close fence alarm,  default:close;
D=the latitude of the position 1;range:-90 ~90(degree);
E=the longitude of the position 1;range:-180 ~180(degree);
F=the latitude of the position 2;range:-90 ~90(degree);
G=the longitude of the position 2;range:-180 ~180(degree);
the latitude supports "N/S" or "+/- " coming before it's value;
the longitude supports "E/W" or "+/- " coming before it's value;;

GFENCE# Check the parameters of the fence.

 

23. Set the low battery alarm

BATALM, A, M# A=ON/OFF,  default:ON;
M=0/1,  way of alarming, 0: GPRS only, 1: SMS+GPRS,  default:1;

BATALM,OFF# Close the low battery alarm.

BATALM# Check the parameters of the alarm.

 

24. Set the SOS alarm

SOSALM,A,M# A=ON/OFF,  default:ON;
M=0/1/2/3, way of alarming, 0 :GPRS only, 1: SMS+GPRS,  2 : GPRS+SMS+phone call, 3: GPRS+phone call; default:3;

SOSALM,OFF# Close the SOS alarm.

SOSALM# Check the parameters of the alarm.

 

25. Call settings 

JC,A# A=0-1, 0: two-way communication;1:monitor;default: 0

 

26. Set the dialing timesCALL,N# N=1~3,  default:1,  times to dial all numbers;

CALL# Check the parameters of the dialing.

 

27. Set ring mode

LS,A# A=0-2, 0: Flash + Sound ;1:flash;2:No flash and sound
;default:0

 LS# Check current statue

 

28. Set sensitivity of

SENSORLEVEL,A# A=1-5: sensiticity range; default:2
LEVEL# check the current sensitivity of sensor

 

29. Set the instruction password

PWDSW,A# A= ON,  enable the instruction password.

PWDSW,password,B# Numbers and letters mix inputs supported for instruction password, at least 1 character, no more than 19 characters,  default:666666;
B=OFF,  disable the instruction password.

 

30. Revise the instruction password

PASSWORD,A,B# A=old password,   numbers and letters mix inputs supported, at least 1 character, no more than 19 characters,  default:666666;
B=new password,   numbers and letters mix inputs supported, at least 1 character, no more than 19 characters.

 

31. Set the SMS forwarding

FW,A,B# A=phone number, phone number to send;
B=SMS content, content to forward.                                                                          Only SOS can use this command.

 

32. set boot alarmBOOTALM,A,M# A=ON/OFF, default: OFF
M=0/1;way of alarm ;0: GPRS;1: GPRS+SMS, default: 1

BOOTALM,OFF# turn off boot alarm

BOOTALM# Check current statue. 

 

33. Set work mode

MODE,N,T# 
N=1/2, 1: WIFI timing and positioning mode  2: gps timing and positioning mode , default: 1
N=1,T means wifi upload interval in fixed time(10-86400 seconds)
N=2,T means if vibration detected and the device is motional, the GPS data will be uploaded in T;  If device is motionless, the GPS will sleep.
(10-86400 seconds)   default: 180

MODE# Query current work mode

 

34. Activite GPS command ( Only for tracking mode)

GPSON,T# T=5~300(minutes)

GPSON# GPS works for 5 minutes. 

35. Remote shutdown

SHUTDOWN#  

36. Set WIFI

WF,A,T1,T2# A=ON/OFF,default: ON
T1=1~60(second); means scanning hot time after open wifi; default:10
T2=10~65535(second); means Device automatically turns on WIFI search every T seconds and uploads hotspot to platform。Default: 180

WF# Check current statue. 

 

37. Turn on vibration upload command

ST,M,A,B# M=ON/OFF means to turn the vibration upload switch on or off. The default is ON.
A=10-300 seconds; SENSOR detection time range; default: 10 seconds
B=1-20 times; valid vibration threshold; default: 1
 

38. Query current parameter

ST#  

© 2018 by Intai.id.